Using Samba

Using Samba

Robert Eckstein, David Collier-Brown, Peter Kelly
1st Edition November 1999
1-56592-449-5, Order Number: 4495
416 pages, $34.95

Buy the hardcopy

Table of Contents


Previous: 8.2 Magic Scripts Chapter 8
Additional Samba Information
Next: 8.4 WinPopup Messages
 

8.3 Internationalization

Samba has a limited ability to speak foreign tongues: if you need to deal with characters that aren't in standard ASCII, some options that can help you are shown in Table 8.3. Otherwise, you can skip over this section.


Table 8.3: Networking Configuration Options

Option

Parameters

Function

Default

Scope

client code page

Described in this section

Sets a code page to expect from clients

850

Global

character set

Described in this section

Translates code pages into alternate UNIX character sets

None

Global

coding system

Described in this section

Translates code page 932 into an Asian character set

None

Global

valid chars

string (set of characters)

Obsolete: formerly added individual characters to a code page, and had to be used after setting client code page

None

Global

8.3.1 client code page

The character sets on Windows platforms hark back to the original concept of a code page. These code pages are used by DOS and Windows clients to determine rules for mapping lowercase letters to uppercase letters. Samba can be instructed to use a variety of code pages through the use of the global client code page option in order to match the corresponding code page in use on the client. This option loads a code-page definition file, and can take the values specified in Table 8.4.


Table 8.4: Valid Code Pages with Samba 2.0

Code Page

Definition

437

MS-DOS Latin (United States)

737

Windows 95 Greek

850

MS-DOS Latin 1 (Western European)

852

MS-DOS Latin 2 (Eastern European)

861

MS-DOS Icelandic

866

MS-DOS Cyrillic (Russian)

932

MS-DOS Japanese Shift-JIS

936

MS-DOS Simplified Chinese

949

MS-DOS Korean Hangul

950

MS-DOS Traditional Chinese

You can set the client code page as follows:

[global]
	client code page = 852

The default value of this option is 850. You can use the make_smbcodepage tool that comes with Samba (by default in /usr/local/samba/bin) to create your own SMB code pages, in the event that those listed earlier are not sufficient.

8.3.2 character set

The global character set option can be used to convert filenames offered through a DOS code page (see the previous section, Section 8.3.1, client code page) to equivalents that can be represented by Unix character sets other than those in the United States. For example, if you want to convert the Western European MS-DOS character set on the client to a Western European Unix character set on the server, you can use the following in your configuration file:

[global]
	client code page = 850
	character set = ISO8859-1

Note that you must include a client code page option to specify the character set from which you are converting. The valid character sets (and their matching code pages) that Samba 2.0 accepts are listed in Table 8.5:


Table 8.5: Valid Character Sets with Samba 2.0

Character Set

Matching Code Page

Definition

ISO8859-1

850

Western European Unix

ISO8859-2

852

Eastern European Unix

ISO8859-5

866

Russian Cyrillic Unix

KOI8-R

866

Alternate Russian Cyrillic Unix

Normally, the character set option is disabled completely.

8.3.3 coding system

The coding system option is similar to the character set option. However, its purpose is to determine how to convert a Japanese Shift JIS code page into an appropriate Unix character set. In order to use this option, the client code page option described previously must be set to page 932. The valid coding systems that Samba 2.0 accepts are listed in Table 8.6.


Table 8.6: Valid Coding System Parameters with Samba 2.0

Character Set

Definition

SJIS

Standard Shift JIS

JIS8

Eight-bit JIS codes

J8BB

Eight-bit JIS codes

J8BH

Eight-bit JIS codes

J8@B

Eight-bit JIS codes

J8@J

Eight-bit JIS codes

J8@H

Eight-bit JIS codes

JIS7

Seven-bit JIS codes

J7BB

Seven-bit JIS codes

J7BH

Seven-bit JIS codes

J7@B

Seven-bit JIS codes

J7@J

Seven-bit JIS codes

J7@H

Seven-bit JIS codes

JUNET

JUNET codes

JUBB

JUNET codes

JUBH

JUNET codes

JU@B

JUNET codes

JU@J

JUNET codes

JU@H

JUNET codes

EUC

EUC codes

HEX

Three-byte hexidecimal code

CAP

Three-byte hexidecimal code (Columbia Appletalk Program)

8.3.4 valid chars

The valid chars option is an older Samba feature that will add individual characters to a code page. However, this option is being phased out in favor of more modern coding systems. You can use this option as follows:

valid chars = Î
valid chars = 0450:0420 0x0A20:0x0A00
valid chars = A:a

Each of the characters in the list specified should be separated by spaces. If there is a colon between two characters or their numerical equivalents, the data to the left of the colon is considered an uppercase character, while the data to the right is considered the lowercase character. You can represent characters both by literals (if you can type them) and by octal, hexidecimal, or decimal Unicode equivalents.

We recommend against using this option. Instead, go with one of the standard code pages listed earlier in this section. If you do use this option, however, it must be listed after the client code page to which you wish to add the character. Otherwise, the characters will not be added.


Previous: 8.2 Magic Scripts Next: 8.4 WinPopup Messages
8.2 Magic Scripts Book Index 8.4 WinPopup Messages

O'Reilly Home | O'Reilly Bookstores | How to Order | O'Reilly Contacts
International | About O'Reilly | Affiliated Companies

© 1999, O'Reilly & Associates, Inc.